Using a MIDI controller with Guitar Rig VST in Cakewalk

I’m writing this post mostly to remind myself how it’s done.

Overview: I’ve got a nice setup in Guitar Rig, including a virtual volume pedal,  and I really want to be able to control it using a MIDI controller foot pedal.

Step 1 – Add an audio track for our guitar, to capture the guitar performance.
You’ll also want to select the appropriate input channel on your audio interface.

Step 2 – Put an instance of Guitar Rig in the FX bin, and select our super-awesome patch:

image

Step 3 – Using the VST2 drop-down menu in the plugin header, select “Enable MIDI Input”:

image

Step 4 – Add a MIDI track to capture the MIDI controller data.

Step 5 – Assign the appropriate input channel for the MIDI track.

In my case, MIDI control data will be generated from my Roland A-80 controller keyboard with various pedals connected to it, connected to the Midisport 2x2 In A, so I assign the input channel thusly:

image 

Step 6 – Assign the output channel of the MIDI track to the Guitar Rig Plugin.
This is possible because we enabled MIDI input in Step 3 above – we get an option to select the plugin as the destination for the MIDI data in the output channel list:

image

Step 7 – Define a controller inside the Guitar Rig plugin

Go to the Options > Controller tab in Guitar Rig, and click on “Add Controller”.

image

At this point, a “New Control” module appears in the Controller list in Guitar Rig.

Step 8 – Click the “Learn” button and wiggle the controller’s foot pedal:

image

Notes:

  • Obviously the controller must be turned on!
  • Assuming the foot pedal has been assigned to CC#4 (which is typical), you should see the controller number appear against the control definition in Guitar Rig.
  • For diagnostic purposes, it helps to have the meters in Cakewalk displaying incoming MIDI messages.

Step 9 – Assign the controller to the Volume Pedal

In the controller list, click on the Menu button and select Volume Pedal > Pedal

image

At this point, moving the expression pedal should be reflected in Guitar Rig’s UI as moving the volume pedal level:

ExpPedal_Volume

If we now arm both tracks for recording, we can record the guitar audio and the MIDI controller data at the same time, capturing the performance.

Add comment

Loading